Konica C224

[s_print]

After replacing the OPC and cleaners on the red drum unit, the red color is pale yellow and pale. How to synchronize the fight, how to do calibration?

After replacing the OPC and cleaners on the red drum unit, the red color is pale. How to synchronize the fight, how to do calibration?

[Trigger]

Re: Konica C224

make sure both boxers go on the bell?
anyways... if you swap the Magenta unit to the old/used one and the symptom changes then you have a faulty unit. these machines tend to calibrate themselves on a new unit detection, no engineer input is required.