Re: Konica Minolta C280 Firmware - Error Code C152
already have sent this.
but you dont extract the tar file you put the a0ed.tar (forget the full name) as is on the root of the usb. do you want me to link you the firmware update procedure
Konica Minolta C280 Firmware - Error Code C152
Collapse
X
-
Re: Konica Minolta C280 Firmware - Error Code C152
Have Extracted the .tar file.
Have in boxed you my address. Can you please send me a USB stick which you recently used.
Thanks and Kind Regards,Leave a comment:
-
Re: Konica Minolta C280 Firmware - Error Code C152
I haven't got it.
Thanks for your help. Please advise
mearmi@hotmail.comLeave a comment:
-
Re: Konica Minolta C280 Firmware - Error Code C152
If you still havent gotten the firmware to load, I can provde a URL and credentials to allow use of internet ISW as long as the machine can get out to web on port 21.Leave a comment:
-
Re: Konica Minolta C280 Firmware - Error Code C152
Just checking you are extracking the A0ED.tar file not leaving it as a zip? Just have to ask as cant assume you familiar with KM firmware update procedures
Sent from my SM-G900I using TapatalkLeave a comment:
-
-
Re: Konica Minolta C280 Firmware - Error Code C152
if worse comes to worse i can post you a known working usb stick with firmware on it. I used it today so atleast then youd know if its bad usb or notLeave a comment:
-
-
Re: Konica Minolta C280 Firmware - Error Code C152
You can get that error if the firmware your using is incorrect. Is it GDC-D1
Sent from my SM-G900I using TapatalkLeave a comment:
-
Re: Konica Minolta C280 Firmware - Error Code C152
When formatting stick as FAT32 call it something.
Byting on bits.Leave a comment:
-
-
Re: Konica Minolta C280 Firmware - Error Code C152
Is it giving invalid memory errorLeave a comment:
-
Re: Konica Minolta C280 Firmware - Error Code C152
Was the machine working OK before you updated the firmware?
Here's the latest FW, give this a try. I only use 2GB USB dives on these on C288/C552's
https://mega.nz/#!hF0Q1SDZ!z-ShY2YSa...ZYXS8pEPDqpgaw
Thanks a lot for the FW. Tried 4 USBs. Not even one worked.
Think the problem is in MFP/Formatter Board,
Regards,Leave a comment:
-
-
Re: Konica Minolta C280 Firmware - Error Code C152
Was the machine working OK before you updated the firmware?
Here's the latest FW, give this a try. I only use 2GB USB dives on these on C288/C552's
Leave a comment:
Leave a comment: