Konica Minolta C280 Firmware - Error Code C152

[mearmi]

Re: Konica Minolta C280 Firmware - Error Code C152

fat32 and use a USB2 usb drive with no more than 8GB

also if ur deprate i have a very old firmware file herer https://www.dropbox.com/s/oelmyay463...0EDFW.tar?dl=0

but if no one else helps u out i can put on the latest one later

Thanks a lot for your reply.

I tried the same file and got C152 on the copier.

This USB was working fine but have another issue now, using 4GB USB but it gives error "This is invalid external memory"

Please advise and also send new firmware.

Many Thanks

mearmi@hotmail.com

[rrrohan]

Re: Konica Minolta C280 Firmware - Error Code C152

Updated the firmware and getting Error Code C152 on Konica C280.

Do anyone can send me latest firmware GCZ-D1 etc. Please also advise about the Right File System for USB (FAT or FAT32 etc.)

Thanks a lot.

mearmi@hotmail.com

fat32 and use a USB2 usb drive with no more than 8GB

also if ur deprate i have a very old firmware file herer https://www.dropbox.com/s/oelmyay463...0EDFW.tar?dl=0

but if no one else helps u out i can put on the latest one later

[mearmi]

Updated the firmware and getting Error Code C152 on Konica C280.

Do anyone can send me latest firmware GCZ-D1 etc. Please also advise about the Right File System for USB (FAT or FAT32 etc.)

Thanks a lot.

mearmi@hotmail.com