[Error Code] C452 Charge cleaner.

[allan]

Any one know of a soft switch to disable the charge cleaner on a C452.
That would be really handy, can't get the gear that runs against the worm gear from the motor.
Got a new motor but no good without that gear.

Thanks

[mx6turbo89]

Re: C452 Charge cleaner.

I ran into the same problem a few months ago and I could not find any way to disable the charger cleaning function. I don't believe one exists unless someone else can chime in and tell us otherwise. However, I was able to order the gear. You cannot?

[allan]

Re: C452 Charge cleaner.

Yes i can but its somewhere floating on the ocean.
Should get it in a couple of weeks.

[mearmi]

Re: C452 Charge cleaner.

Any one know of a soft switch to disable the charge cleaner on a C452.
That would be really handy, can't get the gear that runs against the worm gear from the motor.
Got a new motor but no good without that gear.

Thanks

You can disable it in:

System 1 - Charging Ch Cleaning - K Charge A/C ON/OFF - Turn it off

Regards,

[mearmi]

Re: C452 Charge cleaner.

I ran into the same problem a few months ago and I could not find any way to disable the charger cleaning function. I don't believe one exists unless someone else can chime in and tell us otherwise. However, I was able to order the gear. You cannot?

You can disable it in:

System 1 - Charging Ch Cleaning - K Charge A/C ON/OFF - Turn it off

Regards,

[minimerlin]

Re: C452 Charge cleaner.

You can disable it in:

System 1 - Charging Ch Cleaning - K Charge A/C ON/OFF - Turn it off

Regards,

I think the machine still does an operation of the cleaner during pre-drive start up! Even if the cleaner is turned off during print/copies.

[allan]

Re: C452 Charge cleaner.

I think the machine still does an operation of the cleaner during pre-drive start up! Even if the cleaner is turned off during print/copies.

Jip. No good.