Question about the write unit from b/h PRO 1050

[DigiMan]

Goodmorning everyone!

Long story short machine pops 4601 and wont come back.Tried everything in the SM but the evil persists!
Question is do you know if the write unit is compatible from another model?
I ask this because the new one costs ONLY 2000 thousand freaking euros plus i think you need to change the new IPBA with it too.

Thank you in advance!

[allan]

Re: Question about the write unit from b/h PRO 1050

Ouch. I would try to find a machine to quickly borrow those 2 bits for trouble shooting first.
Manual gives to many possible problems at once for that code.
Does not seem like something to be fixed unless its like a unplugged connector.

[DigiMan]

Re: Question about the write unit from b/h PRO 1050

Ouch. I would try to find a machine to quickly borrow those 2 bits for trouble shooting first.
Manual gives to many possible problems at once for that code.
Does not seem like something to be fixed unless its like a unplugged connector.

Meh tried to be a surgeon about it,buuuut the patient didnt make it.
Although i think the polygon mirror was spinning kinda hard by hand,anyway a friend borrowed me with another and im trying to find a cheap solution at the moment,plus i confirmed with the new ph you need to change the ipba too which guess what,it costs another 2k euros lol.good stuff!