Bizhub C552 error code C8102

[mo0651]

Re: Bizhub C552 error code C8102

Did the sensors check out??

[Gabriel]

Bizhub C552 error code C-8102
Turn around pressure welding alienation trouble

In service mode I initialize the error but the error is coming backback,
I replaced the A0HT R710 00 Motor Ass'y and still same problem
the pressure rollers are in the Home position and when the error is initialized (service mode)
the pressure rollers push/release each other and machine shows the C8102 error again


Any help is welcome