colour shift (registraion problem)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • omikworld
    Technician
    • Mar 2015
    • 10
    #1

    [Misc] colour shift (registraion problem)

    am having issue with my konica bizbub c353, the yellow color always shift from other colours when ever i print with the machine. the yellow colour does not register with other colors but other is in line with the black colour. this problem started after i changed the polygon motor (print head) i have tried stabilization and nothing happened and i also try color registration adjustment and is still the same thing. pls i need help on how to rectify this problem. i can also wahtsapp the printout to anybody that want to help me or email it. thanks
    Tags: None
    • Elmo
      Senior Tech

      Site Contributor
      500+ Posts
      • Feb 2010
      • 541
      #2
      Re: colour shift (registraion problem)

      did you fit the correct print head the C353 is different from the C253/203
      I Used To Live To Fix Things Now i Fix Things To Live

        Comment

        • paulrid
          Trusted Tech

          100+ Posts
          • Nov 2011
          • 206
          #3
          Re: colour shift (registraion problem)

          In tech rep there is a screen (can't think which one) that will tell you how far out it is then use the manual adjustment to get it into spec, there is a flat head screw below all the colour print heads which you can get to by removing front door, not sure it you can just open it.

            Comment

            • omikworld
              Technician
              • Mar 2015
              • 10
              #4
              Re: colour shift (registraion problem)

              Originally posted by omikworld
              am having issue with my konica bizbub c353, the yellow color always shift from other colours when ever i print with the machine. the yellow colour does not register with other colors but other is in line with the black colour. this problem started after i changed the polygon motor (print head) i have tried stabilization and nothing happened and i also try color registration adjustment and is still the same thing. pls i need help on how to rectify this problem. i can also wahtsapp the printout to anybody that want to help me or email it. thanks
              can i get a link where i can view a video concerning this issue?

                Comment

                • omikworld
                  Technician
                  • Mar 2015
                  • 10
                  #5
                  Re: colour shift (registraion problem)

                  Originally posted by paulrid
                  In tech rep there is a screen (can't think which one) that will tell you how far out it is then use the manual adjustment to get it into spec, there is a flat head screw below all the colour print heads which you can get to by removing front door, not sure it you can just open it.
                  i tried turning that flat head screw and no changes too

                    Comment

                    Previous template Next
                    Working...