Konica 2230 rear tray 2 sliser broken....improvised for now
Tray 2 rear slider on Konica 2230 is broken and was moving causing skewed copies and jamming. Placed 2 screws in tray to prevent movement
of rear slider. Not sure if part # is 26na-4730. Or whole tray. Customer would still like it fixed properly. It is in a store and customer
controls use of machine from behind counter. It was one of those TRW placed machines. Frank/ActionPhotocopy
of rear slider. Not sure if part # is 26na-4730. Or whole tray. Customer would still like it fixed properly. It is in a store and customer
controls use of machine from behind counter. It was one of those TRW placed machines. Frank/ActionPhotocopy