[Error Code] C-E301 on Konica Minolta C284e

[mphile]

Good Day All,

I have error code C-E 301 on bizhub C284e showing everytime its prints(Internal prints or workstation). Loaded firmware but nothing changes. I saw here on the forum that Jakani came across the same problem and it needed special firmware, can some-one please send that firmware to shongwemphile0@gmail.com.

bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72

[habik]

Re: C-E301 on Konica Minolta C284e

Just FYI
C224-554e series are on G20-M1
C654-754e G20-M0

Non e series can be upgraded to the M firmware via version up firmware first.

You may as well put it on function version 7.

Should be all compatible with drivers 5.1.3.

Talking about driver, ensure you have correct model in configure tab.

Make contribution to the site and I know of at least one member who will be happy to help you with firmware files.

Sent from portable device using fast cheapset!