bizhub C3100P IU life "no stop" possible?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    [Misc] bizhub C3100P IU life "no stop" possible?

    Good morning, all.

    Is it possible, on these ashtray-models, to configure them not to stop on consumables end-of-life (except for toner)?

    Thank you.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: configure, consumables, end-of-life, stop, toner
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Re: bizhub C3100P IU life "no stop" possible?

      Sorry for hijacking my own thread, but regarding the same machine:

      After rechiping the IUs, the machine is now constantly either warming up or calibrating. Even when it prints, it start warming up or calibration right after it, and it sometimes takes more than 15 minutes to print again.

      Anyone can give some insight on why this could be happening?

      Thank you.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        Previous template Next
        Working...