If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I hope your SSD is at ver. 6.03 or higher and isn't going bad. Have you run the SSD tool that determines if the SSD board is at SSD FW ver. 6.03 and if the board is still good? A blue dot on the back cover by the serial number indicates it was taken care of. Are you familiar with bulletin 9132 on SSD anomoly?
Yes
thanks for the info...turned out to be corrupt firmware. Downloaded a fresh copy and it finished in 10 min. Everything seems to be fine now.
Comment