Bizhub C451 and Stabilizing

[Oscar57]

Hi,

Does anyone know if there is a way to adjust how often the C451 does Stabilization? Maybe by copy count?

[TheOwl]

There is a way that you can turn the Image Stabilization off through the factory setup mode (can't remember the key sequence to enter it though and Konica Minolta won't give it out, even to technicians), but no way to adjust the ammount of time between Image Stab's.

If you do turn it off / adjust the length of time between the Stab's, you find that your image quality will suffer considerably. Unfortunately, this is the nature of the beast when dealing with colour copiers.

[Oscar57]

Thanks for the info. I want it to Stabilize more often to keep the color more consistent.

[TheOwl]

If you are having colour problems then you may need a new trans belt or the ICQ sensors cleaned.

[pepper38_cnd]

The following attachment may be of some interest to you if you would like the entire article send me a pm.

[Oscar57]

Interesting paper, Thanks!