Hi to all
I do not look at Minolta,s normally but i have this 220 which has a service call 14 xfer roller message.
I have taken the transfer roller in and out sometimes it will run upto idle but then go into this error.
I have cleaned the ITB sensor but still it has this fault, it has only done 6500 copies and is clean inside so i am not sure what the problem is.
Thanks.
I do not look at Minolta,s normally but i have this 220 which has a service call 14 xfer roller message.
I have taken the transfer roller in and out sometimes it will run upto idle but then go into this error.
I have cleaned the ITB sensor but still it has this fault, it has only done 6500 copies and is clean inside so i am not sure what the problem is.
Thanks.