Hello,
I have Konica Minolta magicolor 3730DN with error C025H - ROM error. Reflash firmware does not work. Printers initialize but do not communicate. Is there possibility of a service mode that the printer accepts firmware without having to be ONLINE like a Ready2Flash mode for HP printers is? Or NVRAM reset or factory defaults reset by combination of buttons after switch On printer?
Thank you very much for answer.
Radek
I have Konica Minolta magicolor 3730DN with error C025H - ROM error. Reflash firmware does not work. Printers initialize but do not communicate. Is there possibility of a service mode that the printer accepts firmware without having to be ONLINE like a Ready2Flash mode for HP printers is? Or NVRAM reset or factory defaults reset by combination of buttons after switch On printer?
Thank you very much for answer.
Radek