If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You're right, nobody would leave it active for two reasons:
1. The screenserver often slows down the MFP. Each time I enable, it takes several seconds to recover.
2. Sometimes freezes the MFP. I happened to put the weather, really nice but ... disastrous! I had to restart the printer at least 2 times a day.
Unfortunetaly I have a funny machine with this setting missing. User manual says that you actually need to have the markeplace installed in order to see that screensaver setting but no matter what I try and activate/deactive it won't show up.
Unfortunetaly I have a funny machine with this setting missing. User manual says that you actually need to have the markeplace installed in order to see that screensaver setting but no matter what I try and activate/deactive it won't show up.
THX@Bix - ich teste das morgen mal.
its true. until you actually click on marketplace it wont download the "screen saver"
if you dont see that option maybe just click on marketplace. it seems counter productive but it might then allow you to disable it. cant hurt to try
Screen saver of Marktplace is displayed even automatically installed MarketPlace is set to OFF. [INC000000028608/PR00002130]
[Note]
Displaying or not displaying the setting of the screen saver function will be switched depending on whether a user turns ON or OFF MarketPlace by this modification.
-If MarketPlace is turned ON, the setting of the screen saver function is not displayed.
-If MarketPlace is turned OFF, the setting of the screen saver function is displayed.
The functions in MarketPlace account settings are unavailable. [NC000000027592/E
Screen saver of Marktplace is displayed even automatically installed MarketPlace is set to OFF. [INC000000028608/PR00002130]
[Note]
Displaying or not displaying the setting of the screen saver function will be switched depending on whether a user turns ON or OFF MarketPlace by this modification.
-If MarketPlace is turned ON, the setting of the screen saver function is not displayed.
-If MarketPlace is turned OFF, the setting of the screen saver function is displayed.
The functions in MarketPlace account settings are unavailable. [NC000000027592/E
Thanks for the hint, I'm with a C450i wich we have pre-installed about two weeks ago, delivery is scheduled for tomorrow - I just updated the firmware but still there's no screensaver function in admin settings no matter if marketplace is enabled or not BUT the screensaver seems not to show up anymore if marketplace is disabled.
its true. until you actually click on marketplace it wont download the "screen saver"
We tabbed on marketplace - it did not do the trick as well, machine wasn't connected to the internet though, not shure if this is important to trigger that ugly screen saver.
Well I'm happy now since the screensaver doesn't show up anymore^^
here's my 2 cents on the market place app..These are pretty much useless with a couple of exceptions. The new machines come with market place installed and as soon as you connect to the network is tries to go out and update it self.. I can't tell you how many calls we've had for "unable to connect" messages..to remove it from the new I series..
For Bizhub MarketPlace, perform the following to set software switch 172 to HEX 01:
a. Enter Service Mode
b. Select System 2
c. Select Software Switch Settings
d. Set Switch No. to 172
e. Set HEX Assignment to '01'
f. Press Fix
g. Press End
h. Press Exit
i. Power MFP OFF then back ON
3. After power ON, perform the following:
a. Select Utility
b. Select Administrator Mode
c. Select Network
d. Select IWS Settings
e. Select MarketPlace Settings
f. Select Enable settings (OFF) Note: The MarketPlace buttons will be hidden in Basic Style Menu and Classic Style Menu
here's my 2 cents on the market place app..These are pretty much useless with a couple of exceptions. The new machines come with market place installed and as soon as you connect to the network is tries to go out and update it self.. I can't tell you how many calls we've had for "unable to connect" messages..to remove it from the new I series..
For Bizhub MarketPlace, perform the following to set software switch 172 to HEX 01:
a. Enter Service Mode
b. Select System 2
c. Select Software Switch Settings
d. Set Switch No. to 172
e. Set HEX Assignment to '01'
f. Press Fix
g. Press End
h. Press Exit
i. Power MFP OFF then back ON
3. After power ON, perform the following:
a. Select Utility
b. Select Administrator Mode
c. Select Network
d. Select IWS Settings
e. Select MarketPlace Settings
f. Select Enable settings (OFF) Note: The MarketPlace buttons will be hidden in Basic Style Menu and Classic Style Menu
Exactly what we do and is part of our initial setup of these i-series machines.
Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.
Comment