bizhub C458 from Tray 2 Jam-code 12-01 (feed roller didn“t rotate) - Copytechnet.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

Laserbeam

Trusted Tech

100+ Posts

Join Date: Aug 2011

Posts: 152
#1

[Jamming] bizhub C458 from Tray 2 Jam-code 12-01 (feed roller didn“t rotate)

04-18-2019, 05:43 PM
Tags: bizhub, c458, didn“t, feed, tray
tech51

Senior Tech

500+ Posts

Join Date: Jan 2009

Posts: 846
#2

04-18-2019, 06:15 PM
Comment
Laserbeam

Trusted Tech

100+ Posts

Join Date: Aug 2011

Posts: 152
#3

04-18-2019, 07:54 PM
Comment
Bix

Service Manager

1,000+ Posts

Join Date: Apr 2018

Posts: 1421
#4

04-19-2019, 03:27 PM
Comment
Synthohol

Certified Konica Expert

Site Contributor
5,000+ Posts

Join Date: Mar 2016

Posts: 5922
#5

04-20-2019, 01:43 AM

We know a thing or two because we've seen a thing or two.
The medication helps though...
Comment
tsbservice

Field tech

Site Contributor
5,000+ Posts

Join Date: May 2007

Posts: 8081
#6

04-20-2019, 12:22 PM

C458.jpg

Replace one way gear and clear black coating on the shaft in case of Jams from Tray 1,2 and bypass.

A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Comment
Laserbeam

Trusted Tech

100+ Posts

Join Date: Aug 2011

Posts: 152
#7

05-17-2019, 03:26 PM

Attached Files

IMG_2042.JPG (335.9 KB, 424 views)
Comment

Previous template Next

Working...