User Profile
Collapse
-
make sure the density sensors are clean and check the atdc levels and do a toner add if needed to bring to levels. then do a background data reset and... -
it would be total overkill to use the reset FW, simply request a code to reset the password.
https://www.copytechnet.com/forum/technical-forums...👍 1Leave a comment:
-
um, why is there nothing for the MFP board on the screen?
i dont think you selected all.
that would explain the code.
not sure...👍 2Leave a comment:
-
-
the default is usually wapawapawapawapa or just wapawapa.
pretend you are texting it gen-x style😂 5Leave a comment:
-
i would only see 250G drives in monochrome machines. honestly have never used or seen a 250g in a color box.Leave a comment:
-
. For the rest of the mounting procedure, reverse the order of removal.
5. Reinstall the original glass.
6. Turn ON the main...Leave a comment:
-
1: hold down panel reset while turning it on, it should boot into trouble reset mode and the s00s01 should work from there. pending jobs in the queue...👍 2🥰 1Leave a comment:
-
oh ok, i thought you meant there was 2 lines running to the wall so taking the hot from both and combine the ground to one outlet.Leave a comment:
-
what country are you in?
nobody uses IEC60309 plugs in the US, also the copier should be on a single breaker, you cannot "split" the load,...Leave a comment:
-
-
oh, this fiery is linux based.
an 8g or 16g flash drive is needed and the usb prep tool.
what is the "R" signify? i have 2.0 dvd...Leave a comment:
-
-
-
post the reset request here https://www.copytechnet.com/forum/te...-c224-e-can-t-...Leave a comment:
-
-
-
make sure the time and date on the copier is accurate, i know email fails if the server time and copier time differ. not sure if SMB does the same.👍 1Leave a comment:
No activity results to display
Show More
Leave a comment: