I have a C250i in the field that is failing to boot past 50%.
Boot diagnostics FW JIG reported dead SPI flash on CPU-B and we ordered up a replacement...
Search Result
Collapse
500 results in 0.4975 seconds.
Keywords
Members
Tags
-
C250i BASEB PWB Replacement
👍 1 -
c284e refurb
Hi all! I have been given two c284e. One has less copy count, and has a stapler/finisher. However it has an issue at startup, with "enter serial... -
no power, no display, light green
Toshiba 4508A, with a power outage it stopped working and only the green light came on. I checked the main board and it was fine. I even tried another... -
c308 no power (bad PSU?)
Hi all,
Well, my client's trusty c308 is acting up again. :/
This morning, I'm told it "turned itself off and on a few times" before... -
C360i black screen
hi im dealing with a isseu here where i updated the machine c360i bootrom after the restart the machine screen does not turn on but i do hear the machine... -
Canon iR ADV 4545 - Error 355-0004
Hi techs:
If you could please help me with this problem.
I have a dead Canon iR ADV 4545. When I turn-on the machine, the motors... -
-
Samsung MultiXpress X7600GX
hello everyone
after being shipped, this machine will not turn on - checked power, main power switch, control panel power button, fuses are... -
Develop ineo+ 300i not working
Hello, my printer is a Develop ineo+ 300i model. After printing, the text gets erased as soon as I touch it. To solve this, I reset the printer and adjusted... -
CS820de - dead after firmwareupdate
Hello,
I've flashed my CS820DE's firmware to the latest version, but now the machine only boots into this dark waiting screen.
Any suggestions...You do not have permission to view this gallery.
This gallery has 1 photos. -
Bizhub c308, no power...
So our beloved K-M Bizhub c308 (which you kind folks have helped with a couple times in the past), appears to be super dead this morning. Our office... -
Canon IR 8295 - Fixer Unit needed
This machine had some stripped gears on the Fixer Unit (That's what I am told is the name of the part.) The technician took the part to get it sorted...You do not have permission to view this gallery.
This gallery has 2 photos. -
DP7100 Not recognised. Simulation Codes not available in service mode
Hi there,
Quick question for all you Kyocera engineers out there. I have a Taskalfa 4053ci with a DP7100 which is not recognised as an option...