Interesting read.
The CPU1 -> CPU2 -> Boot ROM installation order that I have came from one of the SSD Recovery / No Boot Up bulletins,...
Slammers
Trusted Tech
Last Activity: 20 hours ago
Joined: 02-26-2019
Location: Fife
-
100%. I do Kyocera and they won't even speak to you about a machine unless you've updated everything to latest.
I was just adding my experience...Leave a comment:
-
That is a good question and I can't really advise as it all depends on your own environment and fleet.
In my fleet, this was the only machine that...Leave a comment:
-
Can confirm we experienced the same symptom last week. FW, CPU1 worked fine, CPU2 updated then it was stuck in a boot loop. Wouldnt recognise USB, removing...Leave a comment:
-
Likely the rubber belt that drives the scanner bar, I keep a stock of the Timing Belts in my van. These machines eat them.
When you replace it,...Leave a comment:
-
You still have to update SW 187 to ensure the CPU fan runs in low power mode, even with the latest FW and CPU updates. By default this is off and if you...Leave a comment:
-
This sounds like the exact behaviour experienced when somone sends a job into job storage for release later.
Is someone using the User Box/Secure...Leave a comment:
-
UTAX/TA partnersite has the FW for that model, and is available via UFS. V6.05 released 04/05/2020...Leave a comment:
No activity results to display
Leave a comment: