[Dead] Canon iR ADV 4545 - Error 355-0004

[luis1984bol]

Hi techs:

If you could please help me with this problem.

I have a dead Canon iR ADV 4545. When I turn-on the machine, the motors starts but no image on the panel control.

I had replaced the main PCB1, but I did not replace the:

- TPM PCB
- FLASH PCB
- Memory PCB

When I turn on the machine a Error 355-0004 appears Foto1.jpg
And when I replace the PCBs (TPM. Flash and Memory) this error shows:

Foto2.jpg

Could anyone please help me with this problem? Thank you!!

[ADV COPIER]

If you replace anything PCB, don't forget to update firmware or showing error code

[luis1984bol]

Yes, I had updated the firmware.

[nicknt82]

Replace with correct model. cannot swap different model