Does anyone have any information about the pin out or wire harness available for CN1000 on the main board. It is referred to on the SSD but I cannot find any of the information. I am told this connector will let you connect an intelligent vending device. We are trying to connect, card readers, the ones we have ( supplied by the customer ) do not work well when connected via the key controller connector.
-
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes -
-
Comment
-
Thank you I have all that information, What I am looking for specific is the pin outs and part number for a harness that is supposed to connect to CN1000 on the main board the connector is labled Special Vend.Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI BoxesComment
-
OA technician
Sorry cannot help with that now had a look at info I have will post the question to our support guys at head office but I will suggest you contact your supplier as the card reader systems are usually designed by electronic companies who usually just require a point to point diagram to design a system which will work for your machine.Unfortunately I have not had to connect a card reader to the Biz 250 range yet but if you come right please let me know so that I can archive the solution. sweeet.Comment
Comment