Do MFPs have lan cards(specifically asking for bh367)?
Also on another topic, I ran into a problem where the printer is connected to the lan port of the modem/router(LAN1), the pc's/laptop are connected via WiFi and what happened is the pc's cannot detect the printer even if they were connected to the same modem/network. But the pc's connected(via wifi) can ping each other just fine. Some of my coworkers said about disabling "ap isolation" which would make wired and wireless see each other. Is that really the case? Is there no roundabout way of doing it? Is the cause of the problem really the modem and this "AP isolation" thing?
Also on another topic, I ran into a problem where the printer is connected to the lan port of the modem/router(LAN1), the pc's/laptop are connected via WiFi and what happened is the pc's cannot detect the printer even if they were connected to the same modem/network. But the pc's connected(via wifi) can ping each other just fine. Some of my coworkers said about disabling "ap isolation" which would make wired and wireless see each other. Is that really the case? Is there no roundabout way of doing it? Is the cause of the problem really the modem and this "AP isolation" thing?
Comment