Konica Minolta accurio print C2060L error

[bouba411]

Re: Konica Minolta accurio print C2060L error

Thank you all. found solution visiting russian forums.

Problem fixed with one line of text, using google translator and yandex the russian browser.

Thank you all.

[raplma]

Re: Konica Minolta accurio print C2060L error

Permit me to state what everyone else is thinking...
and I say this as someone who is ultimately an end user who does his own maintenance, but over the years has spent an obsessive amount of time reading the theory manuals, field service manuals, parts manuals, for each machine we've had...
...know when you're out of your depth, bite the bullet in terms of cost and get an experienced tech to come and have a look.

You're running a minimal setup with the basic onboard fiery, very few of us come across your fiery combinations - I didn't even know these existed until your post - as most production machines are installed into an environment that requires a production quality fiery and features. If the internal fiery isn't connecting that's definitely a job for someone who knows these rare fiery setups.

Good luck

[bouba411]

Re: Konica Minolta accurio print C2060L error

dipsw is not for playing. return them back.

How ?

[konicavod]

Re: Konica Minolta accurio print C2060L error

Played a lot with DISPW trying to erase error c-2801.

dipsw is not for playing. return them back.

[bouba411]

Re: Konica Minolta accurio print C2060L error

bouba, stop crying like baby and tell us what have you done to this machine. If you want it back we need much more than nonsense you posted.

Played a lot with DISPW trying to erase error c-2801.

[tsbservice]

Re: Konica Minolta accurio print C2060L error

bouba, stop crying like baby and tell us what have you done to this machine. If you want it back we need much more than nonsense you posted.

[bouba411]

Re: Konica Minolta accurio print C2060L error

Check that the following DIPSW is ON (1).
10-1: ON(1)

I put in ON.
Now I have this error : d0d1 (3)

[konicavod]

Re: Konica Minolta accurio print C2060L error

Check that the following DIPSW is ON (1).
10-1: ON(1)

[konicavod]

Re: Konica Minolta accurio print C2060L error

What did you do with the device before you received the message?

[bouba411]

Re: Konica Minolta accurio print C2060L error

What did you do with the device before you received the message?

Perhaps you were flashing the firmware?

I don't know how to flash a firmware.
Is there a solution ?
Do I have to prepare myself for buying a new printer ?
Would you please help me get out of all this ?

[konicavod]

Re: Konica Minolta accurio print C2060L error

"controller unconnected"

What did you do with the device before you received the message?

Perhaps you were flashing the firmware?

[bouba411]

Re: Konica Minolta accurio print C2060L error

Check that the following DIPSW is ON (1).
40-7: ON(1)

Hello,
Putting 40-7:ON lead to error code c-D0D1

[bouba411]

Re: Konica Minolta accurio print C2060L error

What did you do with the device before you received the message?

Perhaps you were flashing the firmware?


also take a full screen photo.

IMG_20200209_182032-2.jpgIMG_20200209_182112.jpg

[bouba411]

Re: Konica Minolta accurio print C2060L error

What did you do with the device before you received the message?

Perhaps you were flashing the firmware?


also take a full screen photo.

IMG_20200209_182032-2.jpgIMG_20200209_182112.jpg

[tsbservice]

Re: Konica Minolta accurio print C2060L error

Check that the following DIPSW is ON (1).
40-7: ON(1)