Konica Minolta accurio print C2060L error

[konicavod]

Re: Konica Minolta accurio print C2060L error

"controller unconnected" then, not allowing to print a all.
Any advices?

What did you do with the device before you received the message?

Perhaps you were flashing the firmware?


also take a full screen photo.

[orestesp]

Re: Konica Minolta accurio print C2060L error

[ATTACH=CONFIG]44849[/ATTACH]

Try accessing the controller following what the manuals says: Accessing PageScope Web Connection

[bouba411]

Re: Konica Minolta accurio print C2060L error

From what blackcat4866 said, this print controller has 2 seven segment LED displays side by side somewhere on the controller (usually found on the back of the controller or on the motherboard) that indicate its status, if it's not showing "00" after a few seconds since pressing its power button, then something is wrong with it.

I am unfamiliar with this print controller, so I can't help you locate them...

IMG_20200205_204802.jpg

[orestesp]

Re: Konica Minolta accurio print C2060L error

It is an onboard controller, (ic-603), when the machine is ON the controller is ON.

From what blackcat4866 said, this print controller has 2 seven segment LED displays side by side somewhere on the controller (usually found on the back of the controller or on the motherboard) that indicate its status, if it's not showing "00" after a few seconds since pressing its power button, then something is wrong with it.

I am unfamiliar with this print controller, so I can't help you locate them...

[bouba411]

Re: Konica Minolta accurio print C2060L error

Is the controller ON and at "00"?

It is an onboard controller, (ic-603), when the machine is ON the controller is ON.

[blackcat4866]

Re: Konica Minolta accurio print C2060L error

Is the controller ON and at "00"?

[Synthohol]

Re: Konica Minolta accurio print C2060L error

through the network.
same IP you print to.
in a browser or in some cases RDC.

[bouba411]

Re: Konica Minolta accurio print C2060L error

web into the controller and see whats going on.

Since "there is no controller" we Cannot access to the machine other than by using its own display.

[Synthohol]

Re: Konica Minolta accurio print C2060L error

web into the controller and see whats going on.

[bouba411]

Hi
Need help please. My Konica Minolta C2060L display "ready to print" and "controller unconnected" then, not allowing to print a all.
Any advices?
Thanks.