Welcome all. In our difficult time, when you need to stay at home and save as much as possible, I ask for help. I need firmware for konica minolta c253 and c353p. Thanks a lot.
-
-
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.comComment
-
Re: с253 and c353p firmware
Thanks for your reply.
I have a small print shop in not big city in Russia. last two years I bought some used KM printers: bizhub 501, 421, c227 and repair it. sometimes it was succesful, sometimes not
Two months early I bought c253(1) and c353p(2) in bad coundition, and bought c253(3) in good coundition with constant hourglasses.
I taken mfp with NV ram from (1) and some parts with (2) and complete one working c253.
Now I want to complete (1) or (2), but with firmware I having [C253_A02E0Y0-F000-G10-R6; C203_A02E0Y0-F000-GEQ-J8(00)] I had a c-163 firmware error.
So, early I want to contribute and asking firmware, but now we aslo have carantin by covid 19 situation, and I need to discrease my paying, but have some times to repair printers. And it's a reson becouse I wask help.
P.S. Sorry for my English.Comment
-
Re: с253 and c353p firmware
You already have latest FW for C253 (G10-R6). As for error, C-C163. Maybe you are trying to assemble machine with boards from C353p. C353p have different FW hence this error. Which may occur after flashing the MFP firmware. It signifies a ROM contents faulty error due to incorrect or corrupted firmware being installed. I may try to help.A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
-
Re: с253 and c353p firmware
Thx for quick reply.
I tryed different variants. Swap mfp, pwbc etc.
Early, without c253 (3) I tryed:
The c253 (1) was with description: by mistake using another black toner and some mechanism was broken. The noise near rear cover is bad.
So, I dissasembled all parts, incuding TONER CONVEYANCE SECTION, clean all , and swap drives, motors(uses it from c353p( I cann't see any difference).
After complete this, printer was printing, but absolutly without black colour. I think, that problem was in PH black unit. I want to swap it from c353p.
But I bougth c253(3), swap mfp and nv ram by (2), and (3) was printing good.
---
Last time I want to complete one printer using (1) and (2). I buy CF card 128 mb, Firmware imaging tool and start NV RAM reset tool.
so, now after using NVRAM reset tool for c253, the counter of prints is cosmic = 40253114 copies.
and c-163 error.
After I use R-6 firmware - pic attachedafter firmware update.jpg
and still error c-163
-Comment
-
Re: с253 and c353p firmware
There was clearly a flaw in the plate changing process. You need firmwares and a good technician to think correctly and logically what should be done at the end of each stage of the process.
We can pass all the firmwares, but it will be necessary to understand what is happening and decide what should be done.Comment
Comment