Where can I purchase a new firmware chip?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DelawareJim
    Technician

    Site Contributor
    50+ Posts
    • Jan 2008
    • 65
    #1

    Where can I purchase a new firmware chip?

    I have a Konica Minolta Di5510 with an FN-10 finisher. I installed a PK-120 (3- hole punch kit) and it does not work.....Konica Minolta all solutions says to be compatible, a firmware version 14EAH11 is needed. I think this is the E-prom chip located on the PK-120 circuit board. Does anyone have access to 1 of these chips ? Or, is this firmware that has to be uploaded into the copier ?
    I really would appreciate any input on this. Thanks very much, Jim.
    Tags: centre, firmware, purchase
    • Taminol
      Trusted Tech

      Site Contributor
      100+ Posts
      • May 2007
      • 171
      #2
      Originally posted by DelawareJim
      I have a Konica Minolta Di5510 with an FN-10 finisher. I installed a PK-120 (3- hole punch kit) and it does not work.....Konica Minolta all solutions says to be compatible, a firmware version 14EAH11 is needed. I think this is the E-prom chip located on the PK-120 circuit board. Does anyone have access to 1 of these chips ? Or, is this firmware that has to be uploaded into the copier ?
      I really would appreciate any input on this. Thanks very much, Jim.
      Hi DelawareJim,

      I just looked at the KM download centre, there are 2 versions of firmware available for Punch Kit control on the PK-102, Version 11 / Version 12.
      Are you able to get them from there ?

        Comment

        Previous template Next
        Working...