Konica Minolta 458 with AU-205H card reader omnikey

[tlor0026]

I have a Konica Minolta C458 that im trying to install a AU-205H card reader (omnikey)

i've followed all instructions/installed (what i hope to be) the correct loadable driver but im getting a c-180, and also a d216 and d211 which i cannot find anything about on it. Has anyone ever ran into this issue? Is there something im missing? Any help would be greatly appreciated!

[Don N.]

Re: Konica Minolta 458 with AU-205H card reader omnikey

I have a Konica Minolta C458 that im trying to install a AU-205H card reader (omnikey)

i've followed all instructions/installed (what i hope to be) the correct loadable driver but im getting a c-180, and also a d216 and d211 which i cannot find anything about on it. Has anyone ever ran into this issue? Is there something im missing? Any help would be greatly appreciated!

C180 is can't find the loadable driver.
The D code is it can't read the card reader.
Did you uninstall the loadable driver without going into service/billing (stop 9) and unsetting the auth device II type first?
Do that.

[Don N.]

Re: Konica Minolta 458 with AU-205H card reader omnikey

Latest Function ver. is 4.2 SSW 25 Hex B0.
Unset Auth device II in service/billing mode. Then load a suitable loadable driver in system 2 page 2 for the function ver. you are at. May have to configure the reader with vendor # (possibly 076B) and product key (possibly 5427 for an AU205H). I'm not sure if this needs to be a hex value (1533). Then plug in the reader.