RX printing wrong size paper

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rrrohan
    Service Manager

    Site Contributor
    1,000+ Posts
    • Sep 2011
    • 1971
    #1

    RX printing wrong size paper

    Setting up RX print for first time.

    RX works and I have it saving to a userbox as per the customers request.

    everything works except it prints a A4 document in the middle of a A3 sheet and I cant see anyway to specify the paper/tray/size when printing it.

    Only options I have are listed below

    Number of Sets (1-999)
    2-Sided Print* ON OFF
    Color* Use Existing Color Setting
    Zoom*
    Existing Setting
    Fixed Zoom 200.0 141.4 122.4 115.4 100.0 86.6 81.6 70.7 50.0%
    Zoom Magnification % (25.0 - 400.0)
    User Preset Zoom 400.0 200.0 50.0%
    Minimal
    Combine* Existing Setting
    Combine Direction Horizontal Vertical
    Booklet ON OFF
    Bind Direction Left Bind Right Bind
    Finishing
    Sort Group Sort
    Offset ON OFF
    Staple OFF 2 Position 1 Position (Left) 1 Position (Right)
    Set Staple Position Auto 0 degrees
    Binding Position Auto Left Bind Right Bind Top Bind
    Fold OFF Half-Fold Center Staple & Fold Tri-Fold
    Half-Fold/Tri-Fold Operation Selection By Copy Job(Multiple Sheets) Sheet By Page
    Specified Page Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10
    Tags: bind, page, position, setting, staple
    • rrrohan
      Service Manager

      Site Contributor
      1,000+ Posts
      • Sep 2011
      • 1971
      #2
      Re: RX printing wrong size paper

      and (OP reached character limit)

      Page Margin
      Margin Position Auto Paper Select Left Bind Right Bind Top Bind
      Data Entry mm (0.0 - 20.0)
      Image Shift
      Data Entry
      Horizontal Shift Top Bottom mm (0.0 - 250.0)
      Vertical Shift Left Right mm (0.0 - 250.0)
      Change Back Shift
      Data Entry
      Horizontal Shift Top Bottom mm (0.0 - 250.0)
      Vertical Shift Left Right mm (0.0 - 250.0)
      Sheet/Cover/Chapter Insert
      Cover Sheet
      Front Cover None Front(Copy) Front(Blank)
      Cover Paper Bypass Tray 1 Tray 2 Tray 3 Tray 4
      Back Cover None Back(Copy) Back(Blank)
      Cover Paper Bypass Tray 1 Tray 2 Tray 3 Tray 4
      Insert Sheet
      Insert Page(s)
      (1 - 9999 (max. 30 locations) Example 1, 3, 21)
      Insert Type Copy Blank
      Insert Paper Bypass Tray 1 Tray 2 Tray 3 Tray 4
      Chapters
      Insert Page(s)
      (1 - 9999 (max. 30 locations) Example 1, 3, 21)
      Chapter Paper Insertion Copy Insert None
      Chapter Page Settings Bypass Tray 1 Tray 2 Tray 3 Tray 4
      Stamp
      Date/Time Setting
      Date Type '07/1/23 Jan 23, 2007 1/23/'07 23 Jan, 2007 23/1/'07
      Time Type None 1:23PM 13:23
      Pages All Pages 1st Page Only
      Color Black Red Green Blue Yellow Magenta Cyan
      Text Size 8pt 10pt 12pt 14pt
      Text Type Times Roman Helvetica
      Print Position Top Left Top Top Right Left Center Right Bottom Left Bottom Bottom Right
      Fine-Tune
      Top & Bottom Adjustment Top Bottom mm (0.0 - 50.0)
      Left & Right Adjustment Left Right mm (0.0 - 50.0)
      Page
      Page Number Type P1, P2, P3... 1, 2, 3... 1-1, 1-2... 1/5, 2/5... -1-, -2-...
      Starting Page (-99999 - 99999)
      Starting Chapter Number (-100 - 100)
      Insert Sheet Setting
      Cover Sheet Print on Front and Back Cover Print on Back Cover only None
      Insert (Copy) Print Do Not Print Skip the Page(s)
      Insert(Blank) Do Not Print Skip the Page(s)
      Color Black Red Green Blue Yellow Magenta Cyan
      Text Size 8pt 10pt 12pt 14pt
      Text Type Times Roman Helvetica
      Print Position Top Left Top Top Right Left Center Right Bottom Left Bottom Bottom Right
      Fine-Tune
      Top & Bottom Adjustment Top Bottom mm (0.0 - 50.0)
      Left & Right Adjustment Left Right mm (0.0 - 50.0)
      Preset Stamp
      Stamp Type URGENT PLEASE REPLY TOP SECRET FOR YOUR INFORMATION DO NOT COPY IMPORTANT CONFIDENTIAL DRAFT
      Registered Stamp No registered stamp available.
      Pages All Pages 1st Page Only
      Text Size Standard Small
      Color Black Red Green Blue Yellow Magenta Cyan
      Print Position Top Left Top Top Right Left Center Right Bottom Left Bottom Bottom Right
      Fine-Tune
      Top & Bottom Adjustment Top Bottom mm (0.0 - 50.0)
      Left & Right Adjustment Left Right mm (0.0 - 50.0)
      Copy Protect
      Registered Stamp No registered stamp available.
      Preset Stamp Invalid copy Copy Invalid Private Unauthorized Draft Confidential Illegal copy
      Date/Time Setting
      Date Type '07/1/23 Jan 23, 2007 1/23/'07 23 Jan, 2007 23/1/'07
      Time Type None 1:23PM 13:23
      Other
      Job Number ON OFF
      Serial Number ON OFF
      Distribution Control Number
      (1 - 99999999)
      Output Method Number only Put zeros in front
      Detail Settings
      Color Black Magenta Cyan
      Density Light Normal Dark
      Pattern Emboss Text Emboss Background
      Pattern Contrast +2 +1 0 -1 -2
      Pattern Size Small Standard Large
      Pattern Overwrite Front (Overwrite) Back
      Background Pattern Pattern 1 Pattern 2 Pattern 3 Pattern 4 Pattern 5 Pattern 6 Pattern 7 Pattern 8
      Position
      Angle +45 degrees 0 degrees -45 degrees
      Stamp Repeat
      Registered Stamp No registered stamp available.
      Preset Stamp Invalid copy Copy Invalid Private Unauthorized Draft Confidential Illegal copy

        Comment

        • rrrohan
          Service Manager

          Site Contributor
          1,000+ Posts
          • Sep 2011
          • 1971
          #3
          Re: RX printing wrong size paper

          Turns out the original PDF was not A4 dimensions.

          recreated the PDF and it now prints ok, still find it strange the option to pick a paper tray is not a option but luckily in this case it didnt matter

            Comment

            • Bix
              Service Manager

              1,000+ Posts
              • Apr 2018
              • 1421
              #4
              Re: RX printing wrong size paper

              Hi, in the driver it should allow it. But you mean from the additional trays?

                Comment

                Previous template Next
                Working...