Cf9001 set to haunt me

[BUSHWACKER]

Greetings all,
Thanx for the last tip re error code the red wire was corroded, removed cut back and re soldered fan now a for away.
But the fuser roller section is not turning - if it is released and pulled forward all turns manually
Seems like a drive problem Any hints
Regards
Bushwacker

[WaveyDavey]

the drive coupling can stick in, may just need a push from the rear and/or losen screws holding surround assy and it will locate
IIRC its been a while tho !

[BUSHWACKER]

Thanx will give it a go