Enable password for user setting in bh283/363/423

[stf8888]

Dear Technicians of KM ,

Is there any method for me to enable password in User Setting ?

In some of the copier user setting are free , without need admin password.

We need to set a password to prevent of customer mess up the system.

Thanks.

[Terna247]

Re: Enable password for user setting in bh283/363/423

You could create user box and each user have his protection.

Sent from my Infinix X606C using Tapatalk

[EarthKmTech]

Re: Enable password for user setting in bh283/363/423

Dear Technicians of KM ,

Is there any method for me to enable password in User Setting ?

In some of the copier user setting are free , without need admin password.

We need to set a password to prevent of customer mess up the system.

Thanks.

E series onwards can have the administrator password applied to utility menu - don't think it applies to those dinosaurs.

For E series onwards the setting is: DipSw No.200:[Hex:20]

[rrrohan]

Re: Enable password for user setting in bh283/363/423

Pity U can't lock paper tray paper type.

I find that's the most fiddled with setting and customers end up locking out a tray because they set it to thick by mistake

Sent from my Pixel 4 XL using Tapatalk