[Error Code] cfa14 en konica minolta bizhub c458 y c558

[zepekenyo]

[Phil B.]

Re: cfa14 en konica minolta bizhub c458 y c558

how about posting in ENGLISH!?

and NO i'm not going to translate just to be able to read/help.

the whole site is in english... it is based in the USA.

[zepekenyo]

Re: cfa14 en konica minolta bizhub c458 y c558

Good afternoon I have two konica minolta one c458 and one c558 with the same error code CFA14.
I have done the same to both, deactivate the hard drive and it keeps giving me the same error code, formatting them in physical and logical and it keeps giving me the error.
I have also tried to deactivate the HD and I just got the error after a few minutes, the two machines are updated to the firmware version, which is the last special that konica A79J0Y0-F000-GC1-X8-99B0 has released .
but it keeps giving me the same error, I have seen bulletins but they talk about the c368 series and not the c658 series, I have also tried with those firmware of the sata but when trying to put them I do not get them.Sorry for my explanation but I am translating it from Spanish to English.Regards, and thank you very much

[tsbservice]

Re: cfa14 en konica minolta bizhub c458 y c558

Now that's better we can read and reply. If FW is most current I would try new EMMC board.

[Bix]

Re: cfa14 en konica minolta bizhub c458 y c558

Hi, when does this error happen? Immediately or after a few minutes? I have had some FA14 connected to a bad control pannel

[zepekenyo]

Re: cfa14 en konica minolta bizhub c458 y c558

Hi, when does this error happen? Immediately or after a few minutes? I have had some FA14 connected to a bad control pannel

Hello bix, the machine starts me up and lets me make a copy but after two minutes or so the code jumps again, I have tried to deactivate the HD and restart and the code continues to appear.A greeting.

[tsbservice]

Re: cfa14 en konica minolta bizhub c458 y c558

Do you have PaperCut installed? Marketplace installed?