Konica Minolta C6501 print problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Toxic
    replied
    Re: Konica Minolta C6501 print problem

    Strange one.
    What was the reason to replace board?
    OACB is new or used from other machine?
    Did you try to reload firmware after replacing OACB?
    What is current firmware?

    More information you give, more chance somebody figure out what can be problem...

      Leave a comment:

    • grafarts
      started a topic [Misc] Konica Minolta C6501 print problem

      Konica Minolta C6501 print problem

      Hi,
      Recently I have changed the faulty main board (OACB) of my printer (C6501). After that the it takes prints only upto 135gsm. If I gave higher gsm above 135 the printouts are damaged. (Image attached). Kindly help me.
      WhatsApp Image 2021-02-24 at 5.58.08 PM.jpg
      Tags: c6501, gsm, higher, konica c6501
      Previous template Next
      Working...