BizHub 363 C-C164 error

[tsbservice]

Re: BizHub 363 C-C164 error

what happens when you put the old board back in?

for a small contribution to CTN i'm sure someone can help you out with firmware.

https://www.copytechnet.com/forums/v....php?do=donate

Phil looks like he is already a contributor.

[Phil B.]

Re: BizHub 363 C-C164 error

I had a non functioning BizHub 363 that needed a MFP board, so I thought I found one online from a 423 that might work.

I removed and replaced the MFP and now I have a BizHub 363 that boots up but with a C-C164 error.

I put it on our network and i used the web app to access it and the menu indicates the pcb is from a BizHub 223! Bummer.

I probably need firmware for a 363 to make it functional again, but seems like KM has it all that locked down unless you are a dealer or one of their preferred customers.

I hate to beg, but can someone help me out... I would most appreciate it.

what happens when you put the old board back in?

for a small contribution to CTN i'm sure someone can help you out with firmware.

https://www.copytechnet.com/forums/v....php?do=donate

[darichmiester]

I had a non functioning BizHub 363 that needed a MFP board, so I thought I found one online from a 423 that might work.

I removed and replaced the MFP and now I have a BizHub 363 that boots up but with a C-C164 error.

I put it on our network and i used the web app to access it and the menu indicates the pcb is from a BizHub 223! Bummer.

I probably need firmware for a 363 to make it functional again, but seems like KM has it all that locked down unless you are a dealer or one of their preferred customers.

I hate to beg, but can someone help me out... I would most appreciate it.