Konica C452 Grayscale Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vilabuzat
    Junior Member
    • Jul 2021
    • 3

    Konica C452 Grayscale Problem

    When I order it printed in grayscale, the print is all scratched. It already replaces the entire black unit (cylinder and developer unit) and did not solve it. Image follows. 50% black printed in grayscale


    WhatsApp Image 2021-07-13 at 17.02.43.jpg
  • copiray
    Technician
    • Feb 2019
    • 29

    #2
    Re: Konica C452 Grayscale Problem

    Originally posted by vilabuzat
    When I order it printed in grayscale, the print is all scratched. It already replaces the entire black unit (cylinder and developer unit) and did not solve it. Image follows. 50% black printed in grayscale


    [ATTACH=CONFIG]49703[/ATTACH]
    Have you made any adjustments after changing the drum and developer?

    Comment

    • Zesti
      Trusted Tech

      250+ Posts
      • Jun 2009
      • 308

      #3
      Re: Konica C452 Grayscale Problem

      Clean laser window....
      Also check your 2nd transfer roller...

      Comment

      • vilabuzat
        Junior Member
        • Jul 2021
        • 3

        #4
        Re: Konica C452 Grayscale Problem

        Originally posted by copiray
        Have you made any adjustments after changing the drum and developer?
        I only Stabilizer

        Comment

        • vilabuzat
          Junior Member
          • Jul 2021
          • 3

          #5
          Re: Konica C452 Grayscale Problem

          Originally posted by Zesti
          Clean laser window....
          Also check your 2nd transfer roller...
          Where is the second transfer roller?

          Comment

          Working...