Bizhub C250i Fusing

[spinolabay]

Quick update : After fitting an ADJUSTMENT PLATE - ( A161112600 ) & changing dipswitch 12 & 40 to ON the problem is now solved. ( I also changed the fuser temp's back to default.)
Thanks for all the help.
Regards ..... Gary.

[jotunn]

Well, guys try to make some funny test on your machines - probably you will be surprised:
- take any C250i machine (even brand new)
- load 80gsm paper in the casette
- now set the paper as "thin" on machine panel (important!)
- print 10 pages black gradation pattern from service mode
- check with your finger upper and lower 2 inches of each page if the toner is properly fused