[Misc] i - Series Generic Logo

[stf8888]

Hi there ,

what's the soft switch for i - series to turn off the generic logo / model ?

Tried 10-02 but don't work on i series .

Thank you .

[tsbservice]

Hi there ,

what's the soft switch for i - series to turn off the generic logo / model ?

Tried 10-02 but don't work on i series .

Thank you .

It is 10-02 for Konica. What is exactly your setup?

[stf8888]

It is 10-02 for Konica. What is exactly your setup?

yup set to 10-02 but showed generic .

[tsbservice]

yup set to 10-02 but showed generic .

But where exactly? The logo when machine is booting or something else?

[stf8888]

But where exactly? The logo when machine is booting or something else?

when print config page or font list
36c-i

[Synthohol]

boot with a firmware stick and check the "machine/type" ill bet a dollar its set to FF instead of what it should be based on serial#

Table : Machine type information

First four digits of the serial number	AA2J	AA2K	AA2M
[Machine]	10	10	10
[Type]	1	2	D