Blank Line Problem

[Omar Faris]

Re: Blank Line Problem

Agree. Actually it's better to empty developer unit on clean sheet of A3 paper, clear doctor-sleeve gap and screen developer and toner material from debris or caked pieces then poor the mix back into developer unit.

So i have done this and test again, i printed 3 pages which was very good, then same problem appears with little difference, which are that the wrriting is there on paper but not very black, to see the examples here is the links :

FG-1 — ImgBB
FG-2 — ImgBB

reminder : paper format is A4 and the orientation is landscape

[Toxic]

Re: Blank Line Problem

All of us here started guessing from deep possible problem but did you check fuser roller and drum for damage in the middle section?