Bizhub C250 i error code FD-8A

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kopasz
    Junior Member
    • Feb 2018
    • 4

    Bizhub C250 i error code FD-8A

    Is there anyone experienced the error code FD-8A come up on Konica Minolta BH C250i . Its a machine at a Company who using as400 , and i am not sure if its anything to do with that system .
    The C250i its brand new out of the box . I never seen error code like this , and i can not find anything in the manual either .
    If anybody got any idea , please share it with me .

    Thanks guys
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7571

    #2
    Re: Bizhub C250 i error code FD-8A

    CFD##: Abort code

    Trouble detection condition
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • mojorolla
      The Wolf

      2,500+ Posts
      • Jan 2010
      • 2536

      #3
      Re: Bizhub C250 i error code FD-8A

      First off, let me say, you poor bastard, the dreaded AS400....ugh. Came out in 1988, yes really !
      as400.jpg


      The thing with this dinosaur is that the AS400 uses lines of code (PJL/PCL) to set paper size, type, drawers, etc. The settings on the AS400 need to be exact or things go south very fast. The attached gives a general idea of what is needed and the most likely cause is the AS400 was not setup properly, or at all.



      Attached Files
      Failing to plan is planning to fail!!!

      Comment

      • copytech,mike
        CopyTech,MIKE
        • Jun 2014
        • 200

        #4
        Re: Bizhub C250 i error code FD-8A

        Originally posted by mojorolla
        First off, let me say, you poor bastard, the dreaded AS400....ugh. Came out in 1988, yes really !
        [ATTACH=CONFIG]50202[/ATTACH]


        The thing with this dinosaur is that the AS400 uses lines of code (PJL/PCL) to set paper size, type, drawers, etc. The settings on the AS400 need to be exact or things go south very fast. The attached gives a general idea of what is needed and the most likely cause is the AS400 was not setup properly, or at all.



        No support on any C250. Throw it in the dumpster.

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 7571

          #5
          Re: Bizhub C250 i error code FD-8A

          Originally posted by copytech,mike
          No support on any C250. Throw it in the dumpster.
          Well it's not C250 but C250i. You can blame Konica for lack of imagination or buy new glasses.
          Last edited by tsbservice; 09-21-2021, 06:28 AM.
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

          Comment

          Working...