Have a FS-210 booklet maker that the fold is off by quarter inch. How
do you move the fold position up or down. Can adjust fold stopper
for squarness but not sure were to move up or down to position the fold
evenly in half. Checked the U and L plate positions and are correct. Don't
see any other adjustment in manual for fold position.
Any suggestions.
do you move the fold position up or down. Can adjust fold stopper
for squarness but not sure were to move up or down to position the fold
evenly in half. Checked the U and L plate positions and are correct. Don't
see any other adjustment in manual for fold position.
Any suggestions.