bizhub 500 Network Printing Fails

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steppenwolf

    #1

    bizhub 500 Network Printing Fails

    Hi All,

    I have had a lot of success with networked printers over the years, but MFPs are relatively new to me, although I have a few successes under my belt.

    I thought this would be the best place to come for some help from people who know their stuff inside-out.

    I am trying to get a bizhub 500 working with network printing. I can access the web setup page, ping the ip etc.. but I can't seem to get a print job to it. I have used PCL and PS drivers on WinXP. I have tried permutations of the Authentication options. No joy.

    Ulitmately, I would like any user physically connected to the network to be able to print without authenticating and I am not worried about usage tracking.

    Any help would be appreciated, I am starting to think it is firmware/ROM related, and we may have to call in our vendor.

    Thanks,
    Stephen
  • konisolver
    System Engineer

    100+ Posts
    • Oct 2007
    • 137

    #2
    You need the print controller. You are missing the controller. The bizhub500 is out of the box ready for scanning but not printing.

    Comment

    • Steppenwolf

      #3
      OK. That would make sense... that is why I didn't see the IPP option and some other things referenced in the documentation like the option to print from the web interface.

      Thanks,
      Stephen

      Comment

      • redime

        #4
        Originally posted by Steppenwolf
        OK. That would make sense... that is why I didn't see the IPP option and some other things referenced in the documentation like the option to print from the web interface.

        Thanks,
        Stephen
        You are looking for the IC-204, $1500 suggested retail from Konica.

        Its a little EEPROM you plug into the back, you will probably be able to find em online for cheaper or from used machines etc.

        Comment

        Working...