Hello,
I am new here.
I have a used Bizhub C454e that I got out of support, and then got a FS-534 with SD-511 to use for making booklets. not that I have it all connecter, I am unable to finish any booklet. Through Chatgpt, and searching on line, I have tried the following:
- All physical trouble shooting
- Confirmed that the printer recognizes the finisher and the sd, on the machine itself and Printer Properties
- I tested the finisher stapling options
- Test prints come out at the finisher tray
- Updated the printer pc driver
Google is recommending to update the printer firmware as the current one is A5C00Y0-0050-G00-31. Is that really my last option?
Thanks in advance
I am new here.
I have a used Bizhub C454e that I got out of support, and then got a FS-534 with SD-511 to use for making booklets. not that I have it all connecter, I am unable to finish any booklet. Through Chatgpt, and searching on line, I have tried the following:
- All physical trouble shooting
- Confirmed that the printer recognizes the finisher and the sd, on the machine itself and Printer Properties
- I tested the finisher stapling options
- Test prints come out at the finisher tray
- Updated the printer pc driver
Google is recommending to update the printer firmware as the current one is A5C00Y0-0050-G00-31. Is that really my last option?
Thanks in advance