554e Insert blank page or print on the other side of the paper while tri fold?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • printajsifajl
    Technician
    • Jul 2024
    • 40

    #1

    554e Insert blank page or print on the other side of the paper while tri fold?

    Is it possible to print one page PDF to the "second" page of a sheet. I'm wondering cause we want to print one page PDF to a tri fold but print comes on the inside of the fold. We would like to print on the outside of the fold.

    We are using FS-535 but even though documentation shows it on the outside it prints on the inside.

    Only solution, that is hacky at best, is to add one page pdf to original pdf's start and then print double sided to a trifold.

    Thanks for the answers.
  • mojorolla
    The Wolf

    2,500+ Posts
    • Jan 2010
    • 2609

    #2
    Set the paper type to Letterhead for the paper tray and the print drivers; it will print on the backside of the paper.


    Failing to plan is planning to fail!!!

    Comment

    • printajsifajl
      Technician
      • Jul 2024
      • 40

      #3
      This works but only for half fold. Copying throws error that tri-fold can't be done with letterhead.

      Comment

      • printajsifajl
        Technician
        • Jul 2024
        • 40

        #4
        I found a solution:

        You go to Utility menu > Administrator settings > Copier settings > Tri-Fold Print side and switch from Inside to Outside

        Comment

        Working...