Gentlemen
The doc feeder worked but the plastic base was all busted up. So I swapped the parts from this unit to one that was giving a 9401 code, but had a good base. After I did the swap. It started the c6104 code. All I did was take the motor off, that drives the second side white roller cleaner so I could get to the screw for the swap. I had the bulletin for aligning these rollers but I can't find it. Help!
The doc feeder worked but the plastic base was all busted up. So I swapped the parts from this unit to one that was giving a 9401 code, but had a good base. After I did the swap. It started the c6104 code. All I did was take the motor off, that drives the second side white roller cleaner so I could get to the screw for the swap. I had the bulletin for aligning these rollers but I can't find it. Help!