adecanmin
Trusted Tech
Last Activity: 3 days ago
Joined: 10-21-2010
Location: City, State
-
Looks like the key that is purchased is not for the IOT so support is good until 2027. -
Good information. I'm going to use the 21 version. Did you have to purchase a key?...Leave a comment:
-
OK...Leave a comment:
-
Thank you. The code worked. You are a life saver. I made a PayPal donation. For future reference. Are you able to get a reset code for the 8 series or...Leave a comment:
-
I'm a site contributor over the years. I want to contribute to the paypal account. Well worth it.Leave a comment:
-
Good Evening Mr. jotunn
Would it be possible to get a reset code for 224e?
Thank you!...Leave a comment:
-
Fixed! Firmware on bizhub 224e gone wrong
Gentlemen
It turns out the firmware I installed that created the problem somehow corrupted the NVram. I have a NVram from a c364e that I saved... -
Thanks. I'll look at it....Leave a comment:
-
Not sure. I can check later....Leave a comment:
-
I'll try the reset software once I get the machine in the shop....Leave a comment:
-
I'll have the machine in the shop tomorrow. Hopefully I can bring it back to life....Leave a comment:
-
I would if I could get the machine to accept the firmware. Even with the flash drive in the usb port after I lift the metal flap; the machine gets to...Leave a comment:
-
Good advice.
When I was there before the firmware debacle, I did find a duplicate IP and I corrected it. I thought I was done but they called...Leave a comment:
-
Sleep mode is turned off. I'll check the battery when I go back....Leave a comment:
-
I was out there several times for a printing problem. The customer said the machine would lock up and would not print until she unplugged it. I never...Leave a comment:
-
Thanks!...Leave a comment:
-
I wonder if I may of put the wrong firmware in the machine. I don't have real time access to Konica Minolta' s site so I can't check to see if the file...Leave a comment:
-
Firmware on bizhub 224e gone wrong
Gentlemen
Customer was having intermittent printing issues. I haven't updated the firmware on this machine. I installed FW_A61F0Y0-F000-GDS-M1.... -
Good luck
If you do this successfully, you'll feel like a super tech....Leave a comment:
-
if you're talking about the guide that crumbles. It is 14....Leave a comment:
No activity results to display
Leave a comment: