[Misc] Bizhub c2070

[chughtai]

hi every one for konicaminolta expert engineers

i have bizhub c2070 copier i facing error for gamma adjistment C2811 and C2814 yellow and black developer and developer units and
registration sansor. sum time yellow and sum time black gamma problem. i replace all parts according to manual but problem are still same.

if any one face like this problem help.


thanks.

[allan]

Re: Bizhub c2070

hi every one for konicaminolta expert engineers

i have bizhub c2070 copier i facing error for gamma adjistment C2811 and C2814 yellow and black developer and developer units and
registration sansor. sum time yellow and sum time black gamma problem. i replace all parts according to manual but problem are still same.

if any one face like this problem help.


thanks.

Could be drums and or charge units if they are over life.
Check the DPS input values under input check. If it stuck at 0 or 255 then its probably an electronic or wiring issue. If its just too low or less likely high then it could be a charge relate component.

[chughtai]

Re: Bizhub c2070

allan dear
what is the DPS input values
and where can i found

[allan]

Re: Bizhub c2070

O dear...
Do you have a manual?

[chughtai]

Re: Bizhub c2070

yes i have manual

[chughtai]

Re: Bizhub c2070

sorry to say what is the full definition for DPS input value.