A3 i series scan to SMB ver.2/3

[jwai]

Hello,

For A3 i series copier with firmware G00-KD, dip sw 162 set to 01 is for scan to SMB ver.2/3 ?

[Gift]

Re: A3 i series scan to SMB ver.2/3

I think SMB v2/3 should be enabled by default for the i series, noo need to set up dip SW + SMB version can be choosen in admin settings

[jwai]

Re: A3 i series scan to SMB ver.2/3

I think SMB v2/3 should be enabled by default for the i series, noo need to set up dip SW + SMB version can be choosen in admin settings

Thank you for your reply, I checked nothing on SMB setting of admin setting, guess that dip switch may cause of selection of SMB version.