Bizhub 958 print very light

[otphas]

Re: Bizhub 958 print very light

Seems HV1 board is defect, high voltage to charge corona and DV unit is under normal values. Any HV1 for selling?

[elmaligno]

Re: Bizhub 958 print very light

We have a issue with Bzh 958 , print is very very light , values in Level History 1 and 2 is normal. Also coming warning P-9 . Transfer belt and roller seems ok , ID sensor also was cleaned and seems ok. Any tips ?

I would check the operation of the transfer belt sensor. it has failed on occasion and caused me this problem. Replace it.

[allan]

Re: Bizhub 958 print very light

I would check the operation of the transfer belt sensor. it has failed on occasion and caused me this problem. Replace it.

Want to tend to agree. That is complete gradation failure.