Develop ineo+ 258 ghost printing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • a8o2ge
    Junior Member
    • Jul 2022
    • 2
    #1

    [Misc] Develop ineo+ 258 ghost printing

    Hi

    I have problem with DevelopIneo+ 258.
    Toner - Katun.
    Counter - 350000 prints

    I have prints with ghoust images.
    This is orginal image -
    20402b.jpg
    This is print -
    20402.jpg
    What i have tried:
    - changed unit's to new
    - chaned transfer roller to new
    - Fuzer is ok (prints before fuser having ghoust images)

    Anyone got ideas?

    Happy New Year for everyone!
    Tags: develop, ghoust, images, ineo+, prints
    • CP-1015
      Trusted Tech

      Site Contributor
      250+ Posts
      • Nov 2020
      • 298
      #2
      Re: Develop ineo+ 258 ghost printing

      Cleaning blade transfer tape.

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 7909
          #3
          Re: Develop ineo+ 258 ghost printing

          Remove ITB, clean blade section and 2xIDC sensors (only with dry clean cotton swab or piece of cloth). Run stabilization and gradations.
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

            Comment

            • a8o2ge
              Junior Member
              • Jul 2022
              • 2
              #4
              Re: Develop ineo+ 258 ghost printing

              Thanks for the suggestions, I did everything
              Originally posted by tsbservice
              Remove ITB, clean blade section and 2xIDC sensors (only with dry clean cotton swab or piece of cloth). Run stabilization and gradations.
              but the problem is still there.

                Comment

                • ferro10
                  Trusted Tech

                  100+ Posts
                  • Jun 2015
                  • 109
                  #5
                  Re: Develop ineo+ 258 ghost printing

                  If Black and White Molds What Happens? Does the Same Problem Occur?

                    Comment

                    • Copier Addict
                      Aging Tech

                      Site Contributor
                      10,000+ Posts
                      • Jul 2013
                      • 14347
                      #6
                      Re: Develop ineo+ 258 ghost printing

                      Have you tried printing individual colours to see if it's specific to one unit.
                      Could also be failing erase lamp for one of the colours.

                        Comment

                        Previous template Next
                        Working...