If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I Saw the Pic and have the same problem kindly guide me what to do for the pinched cable
Originally posted by HORSE
Got a call from one of my Techs today!! He was had a white line and cleaned the laser path switched on the machine and it threw C-C101. He phoned me and and told me what happened... I knew straight away what happened... trapped wire at back of process unit.
Lucky I had a PRCB in the car and met up with him onsite.... it give me a chance to take some good photos of the problem.
Can anyone tell me where to get the ICP23 fuse for the PRCB of C6501?
Ebay
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Comment