Secure erasing storage board on C250i

[and]

Re: Secure erasing storage board on C250i

I write "new MFP" but you can also use ssd from working MFP.

I clean 4 ssd with windows diskpart. (clean command)
but at the moment 3 of 4 defeat again.

You can take (for emergency) a ssd from a new MFP use diskpart with clean command (remove all partition) and use without problem in a defected machine.
When you install firmware the MFP format the ssd, same case of @Mitch Barron a MFP i series not recognise NTFS partition and format the ssd.

You loose user configuration but no problem with machine serial, counters and consumables count.

[Mitch Barron]

Re: Secure erasing storage board on C250i

Interesting. Can you be more specific? Did you loose any info, machine serial, counters, consumables count?

The only info I lost was the password for authentication, but book address when you import it works perfect, for the rest every was there nothing lost.

[Mitch Barron]

Re: Secure erasing storage board on C250i

Interesting. Can you be more specific? Did you loose any info, machine serial, counters, consumables count?

I am only lost, book address, and smt settings. Machine serial number and consumables all stayed the same.

[techsxge]

Re: Secure erasing storage board on C250i

Just to fix any missinformation here:

ONLY Mode 8 comply with GDPR. Every other mode is (according to our law-makers) recoverable.

[Mitch Barron]

Re: Secure erasing storage board on C250i

Hello :-)

We have a second hand Konica Minolta C250i, where we are trying to secure erase/overwrite the Nvme board AA2JM72702.
We have a desktop PC with Active killdisk installed, which complies with the standard for secure deletion (DoD)

We have bought a Nvme adapter https://www.proshop.dk/Harddisk-tilb...h-UASP/2476387

You have to do it with command prompt if you dont see it with the GUI, then use Diskpart to format the sd